Rc Ta07R Chassis Kit
-
Description
This 4WD R/C touring car chassis assembly kit takes the single belt-driven TA07 PRO and pairs it with a vast range of option parts, for a great racing setup right out of the box! In addition to a number of Hop-Up Option parts, it also has parts from the Tamiya Racing Factory Series and even a new low-friction drive belt made specially for this model.
About the TA-07
The TA-07 chassis racing kit is based around a composite structure that consists of a narrow lower deck and an upper frame. The part design layout provides the chassis optimal torsional rigidity which can be further adjusted by removing the frame center section. The highly efficient single belt drivetrain offers 3 motor position locations, each with its own performance characteristics suited to different tracks and setups. Proven TRF419 design suspension, gear differential units and steering components are combined with proven TRF aluminum shock dampers and universal shafts to make this chassis a hi-spec racer!
New parts included in this kit:
• TA07R Low Friction Belt (White)
• TA07R Linear Damper Springs
Included Hop-Up Options:
• TRF Big Bore Dampers
• Full Ball Bearings
• 42216 44mm Double Cardan Joint Shaft (2pcs.) $82.00
• 42281 TRF418 Stabilizer Set (Front & Rear) $30.00
• 54704 TA07 Aluminum Steering Arm Set $24.50
• 54705 TA07 Aluminum Steering Bridge $15.50
• 54724 TA07 Aluminum Servo Mount $26.00
• 54690 TA07 Front Direct Coupling Set (37T) $22.50
• 54706 TA07 Aluminum Counter Pulley $7.75
• 54722 TA07 Aluminum Center Pulley (18T) $21.50
• 54725 TA07 Aluminum Motor Mount Posts $9.25
• 53509 Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T) $9.75
• 54720 TA07 Carbon Damper Stay (Front) $16.00
• 54721 TA07 Carbon Damper Stay (Rear) $18.00
• 53823 Clamp Type Aluminum Wheel Hub (5mm Thick) $27.00
• 53851 46mm Titanium Coated Suspension Shafts $11.00
• 53917 2.6mm Titanium Suspension Shaft - For Reversible Suspension $20.00
• 54568 TRF418 C Parts (Carbon Reinforced Front Uprights) $5.75
• 54580 Carbon Reinforced Hub Carrier (4˚) for Reversible Suspension Arms $9.25
• 54692 TRF419 E Parts (Rear Uprights) $7.00
• 54740 TA07 D Parts (Suspension Arms, Medium) $9.00
• 54070 TB-03 Aluminum Suspension Mount (1B) $15.00
• 54072 TB-03 Aluminum Suspension Mount (1D) $15.00
• 54172 TA05 Ver.II Separate Suspension Mounts (1A-1XA) $21.00
• 54173 TA05 Ver.II Separate Suspension Mounts (1B-1XB) $21.00
• 53827 Stabilizer Rod Stopper $9.00
• 54648 Fluorine Coated Stabilizer Ball Connector Set $7.50
$469.25 Retail Value!
• 1/10 scale R/C chassis assembly kit. Length: 370mm, width: 187mm, wheelbase: 257mm.
• Drivetrain efficiency is optimized with double cardan drive shafts, front direct coupling, aluminum counter pulley, a new low-friction belt (white) and more.
• The suspension has been fine tuned for a traction boost, employing medium rigidity suspension arms, carbon fiber reinforced uprights and hub carriers, TRF418 stabilizers, aluminum suspension mounts, TRF big bore dampers and carbon fiber damper stays.
• Aluminum steering arm and bridge components give direct and responsive steering feel in conjunction with an aluminum servo mount.
• 3 selectable motor positions offer great freedom of setup options.
• Note: Body, motor, wheels/tires, R/C equipment, battery pack and charger are sold separately.
-
Specifications
- Adjustable Gear Ratio Yes
- Bearings Includes full ball bearings
- Body Material Not Included
- Chassis Material FRP Fiberglass Reinforced Plastic
- Chassis Type TA-07
- Construction Type Assembly Kit
- Differential Type Gear-Type (Oil-Filled) Rear/ Spool Front
- Drive Type 4WD
- Required To Complete 2-channel radio, steering servo, ESC, 7.2volt battery & battery charger, motor, tires, 190mm body set
- Scale 1/10
- Shock Damper Aluminum oil filled
- Suspension Fully Independent Double Wishbone
- Terrain Use On-Road
-
Gallery
-
